HY-201CD Kompyuta Servo ye tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈nParameters:

1. Kɛnɛya: 0.5

2. Sensor: *0.2 level high precision power sensor, linear superior, repeatability good, acquisition frequency high. Sensor: *0.2 level high precision power sensor, linear superior, repeatability good, acquisition frequency high. Sensor: *0.2 level high precision power sensor, linear superior, repeatability good, acquisition frequency high.

3. Kɔɔr: 20KN

4.Testing force range: 0.4% ~ 100% FS

5.Kɔc cï gam: ±0.2%

6.Kɔɔr ye cɔl: 1/2000000

7.Power amplification ratio: whole process automatic shift switching: X1, X2, X5, X10, X20, X50, X100 total seven sections

8.Resolution: 0.0005mm

9.Kuen de deformation: 2% ~ 100% FS

10.Deformation value error limit: within ±0.5% of the displayed value

11.Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl: (10 ~ 650) mm

12.Limit of error of large deformation indication value: ±0.5% of the indication value (Limit of error of large deformation indication value: ±0.5% of the indication value)

13.Resolution de deformation dït: 0.0005mm

14.Ajuiɛɛr ye kɔɔr: Servo Controller

15.Power source: AC brushless servo motor ye looi

16.Power source: AC brushless servo motor

17.Drive screw: ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i ye luɔ̈ɔ̈i

18.Test speed range: 0.005-500mm/min (computer control)

19.Tɛstɛr (ka cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk)

20.Dust-proof device: ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

21.Sistɛm de nyuɔɔth: HY-V software de käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke käke

22.Data transfer: RS-232 data transfer, all parameters are saved on peripheral hardware, computer does not need to install any plug-in hardware, very convenient to users themselves to replace and upgrade, maintaining the computer: RS-232 data transfer, all parameters are saved on peripheral hardware, computer does not need to install any plug-in hardware, very convenient to users themselves to replace and upgrade, maintaining the computer

23.Käke gël juëc:

①.Mechanical start switch protection upper and lower limit travel (Mechanical start switch protection upper and lower limit travel) (Mechanical start switch protection upper and lower limit travel) (Mechanical start switch protection upper and lower limit travel)

②. Ka cɔl emergency stop switch brake protection

③. Ajuiɛɛr de Software Overload Limit

④. Ajuiɛɛr de stop point

24.Kɔmpiye: 880x600x2150mmKɔc cïï kek ya tɔ̈ɔ̈u, ka cïï kek ya tɔ̈ɔ̈u, ka cïï kek ya tɔ̈ɔ̈u

25.Kuen: AC220V 50Hz

26.Kɔɔr: 280kg

HY-201CD Kompyuta Servo ye tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈nFunksiɔn:

1.Software environment: HY-V software package në Windows XP platform.

2.Language selection: with Chinese simplified, Chinese traditional, English and other multiple languages interface in operation free switching, very convenient for operators to use. Language selection: with Chinese simplified, Chinese traditional, English and other multiple languages interface in operation free switching, very convenient for operators to use. Language selection: with Chinese simplified, Chinese traditional, English and other multiple languages interface in operation free switching, very convenient for operators to use.

3.Unit conversion: ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ ye kɔrɔ

4.Tʊma sɔsɔna: Parameters sɔsɔna tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n Lɔ̈ɔ̈m ë yic ②.0.2% off set loolooloolooi ②. Kɔɔr puɔ̈ɔ̈c Kɔɔr puɔ̈ɔ̈c KKɔɔɔr puɔ̈ɔ̈c. Taawu ye kɛ̈ɛ̈r TaTaTaawu ye kɛ̈ɛ̈r TaTaTaTaawu ye kɛ̈ɛ̈r. Lɔ̈ɔ̈i de wɛ̈ɛ̈r LLLLɔ̈ɔ̈i de wɛ̈ɛ̈r LLLLLɔ̈ɔ̈ɔ̈i de Cutting strength Cutting strength Cutting strength Cutting strength CutCutting strength CutCutCutting strength CutCutCutting strength CutCutCutting strength CutCutCutting strength CutCutCutting strength CutCutCutting Cutting strength Break value kä ye kek tɔ̈ɔ̈u. A deformation quantity <unk>. Average value 11. Graphics wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r

5.Multiple curve display modes: Stress-strain, power-displacement, power-time, strength-time, etc. Multiple curve display modes: Stress-strain, power-displacement, power-time, strength-time, etc. Multiple curve display modes: Stress-strain, power-displacement, power-time, strength-time, etc.

6.Luɔ̈ɔ̈i de wël: Luɔ̈ɔ̈i de wël ye kɔc gɔ̈ɔ̈r tɛ̈n yenë kɔc gɔ̈ɔ̈r tɛ̈n yenë kɔc gɔ̈ɔ̈r tɛ̈n yenë kɔc gɔ

7.Test mode: ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r. Kɔl. Resistance. Resistance. A gɛlɛ. Rip. Gɛl. Lɔ̈ɔ̈ŋ Lɔ̈ɔ̈ŋ Lɔ̈ɔ̈ŋ Lɔ̈ɔ̈ŋ Lɔ̈ɔ̈ŋ Lɔ̈ɔ̈ŋ... etc.

8.Control Mode: Lɔ̈k tɛ̈n. Lɔ̈ɔ̈ŋ. Lɔ̈ɔ̈i de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r. Lɔ̈k load. Load weight rate ye load stress rate ye. Stress rate, etc.

9.Zero function: power, extension, displacement just press a button to manually reset zero, while having a test start when the system automatically resets zero function: power, extension, displacement just press a button to manually reset zero, while having a test start when the system automatically resets zero function: power, extension, displacement just press a button to manually reset zero, while having a test start when the system automatically resets zero function

10.Dynamic Display: Loading, stretching, displacement, and selected test curves are displayed dynamically on the main screen during the test. Loading, stretching, displacement, and selected test curves are displayed dynamically on the main screen during the test. Loading, stretching, displacement, and selected test curves are displayed dynamically on the main screen during the test.

11.Pivot Hold: Pivot zui of the test item is always displayed on the screen during the whole process of testing. Pivot Hold: Pivot zui of the test item is always displayed on the screen during the whole process of testing. Pivot zui of the test item is always displayed on the screen during the whole process of testing.

12.Manual pick-up function: a naŋ a special manual pick-up function during the test process.

13.Automatic Determination: After the sample is destroyed, the system automatically identifies and automatically switches according to the expected test requirements to complete the next function. Automatic Determination: After the sample is destroyed, the system automatically identifies and automatically switches according to the expected test requirements to complete the next function.

14.Automatic Storage: Test conditions, test results, and marking distance location are automatically stored. Automatic storage: test conditions, test results, and marking distance location are automatically stored. Automatic storage: test conditions, test results, and marking distance location are automatically stored.

15.Automatic Return: a tɛ̈n yenë a tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen

16.Graphic Analysis: N'a sɔrɔ ka tɛmɛ, a lëu ba data ya tɛmɛ mouse në curve de tɛmɛ, a lëu ba data ya tɛmɛ në curve de tɛmɛ, a lëu ba data ya tɛmɛ në curve de tɛmɛ.

17.Curve contrast: Curves of the same group samples can be overlaid contrast. Curves of the same group samples can be overlaid contrast. Curves of the same group samples can be overlaid contrast. Curves of the same group samples can be overlaid contrast.

18.Raport output: Graphics and parameters are open to customers to modify as needed. Raport output: Graphics and parameters are open to customers to modify as needed. Raport output: Graphics and parameters are open to customers to modify as needed. A lëu bɛ̈n ya tɔ̈ɔ̈u në formɛt de rapɔɔr WORD, a lëu bɛ̈n ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u.

19.Kɔɔr dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈

20.HY-201CDKɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈ɔ̈th ye kɔnɔ̈