Luɔi
Application

DCR-1020Can be done multi-station round knife set mold cutting, material composite, this equipment is suitable for all kinds of tape, protective film, foam, mesh, copper aluminum foil, backlight source module, flexible circuit board, medical and hygiene and other mold cutting industries.
DCR-1020 is suitable for multi-station set position die cutting, laminating. This machine is applicable for adhesive tape, protection film, foam, mesh cloth, aluminum and copper foil, back light module, flexible circuit board, medicine and hygiene field, etc.

Karakteristika
Feature
1.Main operation uses computer touch industrial control machine, graphics display, intuitive and clear, operation easy can be used simultaneously with keyboard and mouse and with hand touch. 1.Main operation uses computer touch industrial control machine, graphics display, intuitive and clear, operation easy can be used simultaneously with keyboard and mouse and with hand touch.
The main operation interface adopts touch panel, with picture display for easy operation.
Keyboard, mouse and hand touch are all available.
2.Can store more than 500 kinds of SOP data, improve the standard degree, reduce the degree of dependence on the experience of employees, and can reduce the adjustment knife process material waste rate more than 60% 2.Can store more than 500 kinds of SOP data, improve the standard degree, reduce the degree of dependence on the experience of employees, and can reduce the adjustment knife process material waste rate more than 60%.
It can save more than 500 kinds of SOP data, improve standard level, and reduce dependence on
Operator’s experience and reduce more than 60% material waste.
3. Kä ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam ye kek gam
All unwind & rewind shafts are driven separately by servo motors. The unwinding, rewinding, straight & reverse rotation are more flexible and controlled by high sensitivity tension sensor shaft’s feedback to ensure smooth running.
4.All tool seat motion control is driven by German Lenz's servo motor, torque is sufficient, plus slowdown stable, independent adjustable, cutting accuracy can reach ±0.075mm. 4.All tool seat motion control is driven by German Lenz's servo motor, torque is sufficient, plus slowdown stable, independent adjustable, cutting accuracy can reach ±0.075mm.
All cutter holder’s movements are controlled by German Lenz servo motor with enough torsion, stable acceleration and deceleration, precision can be ±0.075mm.
5. Ajuiɛɛr ye cɔl Lenz PLC ye Germany ye cɔl Synchronous Controller ye cɔl Synchronous Controller ye cɔl Synchronous Controller ye cɔl Synchronous Controller ye cɔl Synchronous Controller ye cɔl Synchronous Controller.
The control system is operated by German Lenz PLC and logic movement controller with better synchronism.
6. Masin dɔ bɛ̈n tɔ̈u asynchronous mould cutting function, lëu bï mould cutting materials ya tɔ̈ɔ̈u.
Machine has the function of asynchronous laminating which can save material.
7.With mobile auxiliary discharge shaft.
Movable auxiliary unwind shaft.
8.Equipped main release EPC correction device to make the material enter the tool seat stable. 8.Equipped main release EPC correction device to make the material enter the tool seat stable. 8.Equipped main release EPC correction device to make the material enter the tool seat stable.
Main unwind EPC system can stabilize the material feeding into blade holder.
9. ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye t
Fracturing detecting (including transparent material) machine stop or alarming to reduce material waste.
10.Equipped with CCD detection device, during production process can detect the real time setting accuracy of the product, then feedback to the PLC to give instructions to the servo motor to size adjustment. 10.Equipped with CCD detection device, during production process can detect the real time setting accuracy of the product, then feedback to the PLC to give instructions to the servo motor to size adjustment.
CCD testing system can test position precision all the time during the whole process and then feedback to PLC which send orders to servo motors to adjust position.
11. ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u ke ye tɔ̈ɔ̈u. Color code electric eye tracking system can meet the demand of position precision of produce printing product.
12. Ka tɔ̈u në masin tök de luɔɔi de kä juëc ye kek looi në kaam tök de luɔɔi de kä juëc ye kek looi në masin tök de luɔɔi de kä juëc ye kek looi në masin tök de luɔɔi.
Machine can process two different types of materials at the same time which improve capacity utilization.

Karakteristika:
Features
A cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a cɔl a c
Stable speed acceleration and deceleration. Unchangeable position precision. Fine tuning of CCD camera testing ensures die cutting precision. Function of stopping machine when material is broken. Color code electric eye tracking function. It can process two different types of materials at the same. Flexible and convenient operation with keyboard, mouse and hand touch.

DCR-1020 Ten-station Rotary Die Cutting Machine
Application
DCR-1020 is suitable for multi-station set position die cutting, laminating. This machine is applicable for adhesive tape, protection film, foam, mesh cloth, aluminum and copper foil, back light module, flexible circuit board, medicine and hygiene field, etc.

Feature
1. The main operation interface adopts touch panel, with picture display for easy operation.
Keyboard, mouse and hand touch are all available.
2. It can save more than 500 kinds of SOP data, improve standard level, and reduce dependence on Operator’s experience and reduce more than 60% material waste.
3. All unwind & rewind shafts are driven separately by servo motors. The unwinding, rewinding, straight & reverse rotation are more flexible and controlled by high sensitivity tension sensor shaft’s feedback to ensure smooth running.
4. All cutter holder’s movements are controlled by German Lenz servo motor with enough torsion, stable acceleration and deceleration, precision can be ±0.075mm.
5. The control system is operated by German Lenz PLC and logic movement controller with better synchronism.
6. Machine has the function of asynchronous laminating which can save material.
7. Movable auxiliary unwind shaft.
8. Main unwind EPC system can stabilize the material feeding into blade holder.
9. Fracturing detecting (including transparent material) machine stop or alarming to reduce material waste.
10. CCD testing system can test position precision all the time during the whole process and then feedback to PLC which send orders to servo motors to adjust position.
11. Color code electric eye tracking system can meet the demand of position precision of produce printing product.
12. Machine can process two different types of materials at the same time which improve capacity utilization.

Features
Stable speed acceleration and deceleration. Unchangeable position precision. Fine tuning of CCD camera testing ensures die cutting precision. Function of stopping machine when material is broken. Color code electric eye tracking function. It can process two different types of materials at