Profile

1-8Axis Ethernet/RS232Ekonomik motion controller

Galil

DMC-21x5 Ethernet Motion Controller ee looi bɛ̈n ya tɔ̈ɔ̈u në luɔɔi dɔ̈ɔ̈r/luɔɔi dɔ̈ɔ̈r ye looi në DMC-21x3. DMC-21x5 be DMC-21x3 ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ̈t ye dɛ A DMC-21x5 cï bɛ̈n ya looi ka tɛ̈ɛ̈r ye, ka tɛ̈ɛ̈r ye, ka tɛ̈ɛ̈r ye, ka tɛ̈ɛ̈r ye:

l

Ethernet 100

Base-T komunikasi port

lLɛɛr ye 4000 x 801l8A ye 24,000 elementlDMC command processing is 20 times faster than DMC-21x3. DMC command processing is 20 times faster than DMC-21x3. DMC command processing is 20 times faster than DMC-21x3. DMC command processing is 20 times faster than DMC-21x3.DMC-21x5Serial Controller yekaA version of the axes, a can be configured as any combination of step or servo motors. A version of the axes, a can be configured as any combination of step or servo motors. A version of the axes, a can be configured as any combination of step or servo motors.1-4Shaft controller size ye 32 10.8 cm x 17.8 cmHa5-8Shaft controller's size is only10.8 cm x 27.3 cm. DɛBit 8 ARMController,DMC-21x5

Controller offers several advanced functions, such as with speed forwarding, acceleration forwarding. Controller offers several advanced functions, such as with speed forwarding, acceleration forwarding. Controller offers several advanced functions, such as with speed forwarding, acceleration forwarding.PIDCompensation, ye looi 2 Application ye tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈u ka tɛ̈n tɔ̈uI/OWait. Motion modes include: point to point positioning, location tracking, point moving, straight line and arc insertion, contour control, electronic gear synchronization and electronic cams. Motion modes include: point to point positioning, location tracking, point moving, straight line and arc insertion, contour control, electronic gear synchronization and electronic cams.Kɛ fɛɛrGalil

Cït controller, luɔɔi

• Lɛtɛrɛw ye kɔɔrɔ, ku software ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ ye kɔɔrɔ yeGDKa simplified greatly).DMC-21x5luɔɔi.
• KarakteristikaHa luɔɔi yam ekonomi,1GalilNew Generation luɔɔiDMC-41x3Serial controller.Ethernet 10 Base-T
• Port;laar 1 RS232 8 Port, ka tɛmɛ19.2kbYe.
• DMC-21x5
• wakaAxle board card controller, yenx = 1,2,3,4,5,6,7,8Axis.
• Users can configure their own servo motors, stepper motors or any combination of the two on each axis. Users can configure their own servo motors, stepper motors or any combination of the two on each axis. Users can configure their own servo motors, stepper motors or any combination of the two on each axis.Optional plug-in amplifier board, a lëu bï ya tɛmɛ stepper motors la a lëu bï ya tɛmɛ500WBrush/Servo motor ye cïn brush ye.Ethernet ee kɔc juëc ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac ye kɔc mac. Adopting ku
• I/ODevice CommunicationTCP/IPkuUDP
• Kontrol.Receive up to ye15MHz
• Servo encoder feedback signal, ka tɛmɛ
• 3MHz
• Stepper motor command output.8A ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl a ye kɔc cɔl
• PID
• Kompensasyon.
• Kä juëc ye kɛ̈ɛ̈r: kɔl ye kɛ̈ɛ̈r, kɔl ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛKa elliptic variable ratio, angle slowdown, infinite line segment feed and speed ratio control.Multi-threaded tasking, lëu bï ya looi në kaam tök
• Application ye.
• Non-volatile memory ye app, variable, ku array tɔ̈ɔ̈u.Servo axis tök ye encoder feedback channel yiic. 8 Axis origin input ku positive/Limit reverse. 8 Axis bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ1-4Axis Controller ye gäm 16 laar 16 TTL
• Universal Input kuRoad output;5-8Axis Controller ye gämInput path kuLɔ̈k bɛ̈n.
• ICM-20105A lëu bɛ̈ɛ̈i ye cɔl light isolation 8 I/O 40 ku500 mAHigh pressure side output (Dɛ̈ɛ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈DB-28040WurtinInput analog path kuNamba
• I/O；RIO PLCA lëu a juakI/OYe.1-4Size of axis control board:
• 10.8 cm x 17.8 cm；
• 5-8Size of axis control board:10.8 cm x 27.3 cmYe.DINLɔ̈ɔ̈m de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛr de gɛɛrDaan+5V，
• +/-12V DCInput; Ye kelen9V-48V DCWɛɛrDC-DC
• Converter ye yic.KɔmpiICM-201xxKa kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l yeD