Član VIP
Detalji proizvoda
★Model, nyin masin
MGW-7022 Microcomputer Control Electro-Hydraulic Servo Static Load Anchor Tester
★Kä ye looi, kä ye looi
GB/T14370-2015 <unk>Anchors, clamps and connectors for pre-stress<unk>
GB/T 2611-2007 <unk>General Technical Requirements for Testing Machines<unk>
TB/T3432-2016 <unk>High Speed Railway Prefabricated Zhangfa Prestress Concrete Short Beam<unk>
TB/T3193-2016 <unk>Ajuiɛɛr, Ajuiɛɛr ku Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr de Ajuiɛɛr
JT329-2010 <unk>Road Bridge Pre-Stress Steel Hanging Wire Anchor, Connector Test Methods and Inspection Rules<unk>
★Main Use (Luɔi)Ku Profile
1.The machine is mainly used in railway road bridges and water utilities such infrastructure construction. The machine is mainly used in railway road bridges and water utilities such infrastructure construction. The machine is mainly used in railway road bridges and water utilities such infrastructure construction. Fixtures, connectors static load anchoring efficiency coefficient, limit pull total strain, anchor plate strength and cycle load performance tests. Fixtures, connectors static load anchoring efficiency coefficient, limit pull total strain, anchor plate strength and cycle load performance tests. Fixtures A lëu bï ya looi në GB/T14370-2007 "Pre-stress reinforcement for anchors, clamps" standard, në servo control conditions.
2.With load, displacement two control channels and corresponding to it's force, stress, displacement three control modes, control modes can be randomly/randomly switched between control modes. 2.With load, displacement two control channels and corresponding to it's force, stress, displacement three control modes, control modes can be randomly/randomly switched between control modes. PID parameters alëu bï ya waar online.
3.Can be done equal rate load, stress, displacement control and constant load, stress, displacement control and adopt stepless speed adjustment.
4.Automatic draw force-shift, force-time, shift-time and other multiple test curves, automatically edit the test report and print the output at the right time.
5.Measuring system has automatic clearing zero, automatic calibration function, continuous whole course measurement not divided. 5.Measuring system has automatic clearing zero, automatic calibration function, continuous whole course measurement not divided.
6. A lëu bï ya looi ka tɛ̈ɛ̈r ye cɔl multi-color curve comparison test, ku a lëu bï ya kuany ka tɛ̈ɛ̈r ye cɔl any section on the test curve for regional amplification analysis, and can switch to show various test curves during the test process;
7. a naŋ database ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye k
8. ye kɛ̈ɛ̈r juëc ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ
★Specifications & Technical Parameters
1. Pɛ̈l ye kɔɔr: 6500kN
2.Test force measurement range: 1%-100% (full scale not divided, automatic shifting)
3.Testing force indication accuracy: ≤±0.5% (accuracy grade: level 1)
4. Load measurement resolution: 1/600000
5. Ajuiɛɛr ye cɔl load control range: 0.1~4%FS/S
6. Piston maximum displacement: 200mm
7. Shift measurement range: 0-200mm
8. Shift measurement accuracy: ≤±0.5%
9. Shift measurement range: 2~100%FS (continuous full-scale measurement)
10.Equal Rate Control Precision: 1% Set Value
11. Load constant, shift control accuracy: 0.5% set value
12. Shift measurement accuracy: ±0.5%FS
13. Resolution of displacement measurement: 0.001mm
14. Lɔ̈k: 3400mm
15.Sample specification: Φ11.10mm; Φ12.70； Φ15.20mm； Φ17.8mm； Φ21.80mm (lëu bï ya looi në kë wɛ̈t cï raan luɔɔi wɛ̈t)
Ba wël wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ̈t wɛ
Онлайн разпит
-
Kontakti
-
Kompanija
-
Telefon
-
E-mail
-
WeChat
-
Kod provjere
-
Сједност поруки
-