JunqiInstrumentGC-9890A gas chromatograph parameters

<unk> Kä ye kɔrɔ
1Kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ.
2The inter-column compensation circuit allows the drift of the baseline during the program heating operation to be electronically compensated, reducing by second Pilon root、Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye.
3.Signal de detector, number de heater, temperature de heater, reading de flow sensor wala signal de column compensation baseline ye tɔ̈ɔ̈u alëu bï ya tɔ̈ɔ̈u në analogue output channel.
4. Automatic detection and troubleshooting, power off protection storage of experimental data. 4. Automatic detection and troubleshooting, power off protection storage of experimental data. 4. Automatic detection and troubleshooting, power off protection storage of experimental data.Sekondi-tɛ̈n-tɛ̈n-tɛ̈n-tɛ̈n-tɛ̈n-tɛ̈n-tɛ̈n-tɛ̈nKeyboard lock function.

5A bɛ se ka tɛmɛ counter-control workstation, a bɛ se ka tɛmɛ real-time control, a bɛ se ka tɛmɛ 100 sets of experimental conditions and spectrograms.

6, lëu bï ya tɔ̈ɔ̈u në US HP-5890 gas chromatograph micro thermal conductivity detector, bï ya tɔ̈ɔ̈u në kaam tök.
7.Can install2 kanal ye sensor flow ye，Two single column compensation channels (Kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye kɔl ye)Ye.

﹡Heating Furnace System
Temperature Range：Tɛmpɛr wɛɛngɛ +5℃～400 ℃ 3rd order program heating, heating rate 0～50℃/min； Wurting

A ye 0.1°C/min. Temperature control accuracy ± 0.05 ℃, a lëu bï a lɔ̈ɔ̈m bï a lɔ̈ɔ̈m bï a lɔ̈ɔ̈m bï a lɔ̈ɔ̈m bï a lɔ̈ɔ̈m

Ajuiɛɛr ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈ɔ̈m ye kɔc lɔ̈Loktu min looi ka tɛmɛ ka tɛmɛ ka tɛmɛ 300°C ka tɛmɛ 50°C6minYe.

﹡Sample System

1Filling Column Sampler: a lëu bï ya looi në kɔlɔ̈ɔ̈r juëc ye kɔlɔ̈ɔ̈r ye kɔlɔ̈ɔ̈r ye kɔlɔ̈ɔ̈r ye kɔlɔ̈ɔ̈r

2Capillary sampler: a lëu bï ya tɔ̈ɔ̈u në biäk/biäk de biäk de biäk de biäk de biäk de biäk de biäk de biäk de biäk de biäk de biäk de biäk

3.A lëu bï ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u

﹡Detector System
1. HidrogenFlame Ion Detector（FID）：

A yooth bɛ̈n tɔ̈ɔ̈u ku tɔ̈ɔ̈u, a yooth bɛ̈n tɔ̈ɔ̈u ka tɔ̈ɔ̈u, a yooth bɛ̈n tɔ̈ɔ̈u；Signal dɔ̈ɔ̈r lëu bï ya juak logarithmically, bï ya dɔ̈ɔ̈rYeInterference, sensitivityA linear, a wide range.
Sensitivity:Tip AMt≤5×10-11g/s ((正十六烷)
Luɔi baseline：≤ 6×10-12A/H
Linear Range: ≥105
Wakat tɛmɛ: <0.5h

2, Thermal Conductivity Detector (TCD):

Sensitivity:Tip A ：≥4000mv•ml/mg ((正十六烷)

Raan ye cɔl base line noise: ≤30μv (helium ye cɔl 99.999)
Wakt tɔ̈u: A <1.5h gël de gaz

Lɛɣtɛr: 2020/9/2 10:22:38