
◆Bayan
AT2008 three-phase multiplex rate harmonic multifunction power meter adopts digital signal processing chip and high precision electrical power measurement chip, can accurately and stably measure all commonly used electrical parameters in the three-phase grid, three-phase voltage, three-phase current, active power, non-active power, visible in power, grid frequency, power factor, four quadrant power, voltage imbalance, current imbalance, voltage total harmonic and sub-harmonic content, current harmonic total harmonic and sub-harmonic content, zero order current, UIPQ needs, split time billing with 4 rates and 8 hours, switch volume input monitoring, relay output control, and with 2-way RS485 pass-through interface, active power pulse output and non-active power pulse output, SOE event recording alarm and other functions.
Three phase multiple rate harmonic multi-function power meter as a advanced intelligent, digital grid front end collection unit, has been widely used in various control systems, SCADA systems and energy management systems, substation automation, distribution network automation, district power monitoring, industrial automation, smart buildings, smart distribution disk, switching cabinet, with easy installation, simple wiring, easy maintenance, small engineering volume, field programmable setting input parameters, can complete network communication between different industry PLCs, frequency converters, industrial control computers and so on. Kä ye kek looi aye kä ye kek looi, kä ye kek looi aye kä ye kek looi, Please contact our company.
◆ Function Introduction
|
Funksiɔn measure |
Gat Note |
|
|
Real Time Measurement |
Voltage 3 ye |
Funksiɔn Basic |
|
3-phase Current |
||
|
Power, Frequency, Power Factor |
||
|
Elektrik |
Power ye baara |
|
|
No Power |
||
|
Two-way measurement (Dɛ̈l-dɛ̈l-dɛ̈l-dɛ̈l-dɛ̈l-dɛ̈l-dɛ̈l) |
||
|
A wïc |
UIPQSlider |
Funksiɔn Extension |
|
Harmonic measurement (Harmonic measurement) |
Total harmonic content2-31Second, Harmonic Content31Ye |
|
|
Re-tariff |
4Tarif8aWaktu |
|
|
Pulse elektrik |
Active, non-active node output |
|
|
Gäm output |
4-20mA/0-5V |
|
|
Switch input |
Node passive |
|
|
Relay output |
AC250V/5ARemote Control/Polis |
|
|
Log event |
Polis |
|
|
Komunikasyon |
RS485InterfaceMODBUS-RTU (1Road wala2laar) |
|
|
Nyuɔ̈th |
LCDLCD Display |
|
◆ Parameter teknis
|
Kuen |
Cɔl Namba |
||
|
Lose Lɔ Testing Kuantiti Nyuɔ̈th Nyuɔ̈th |
Network |
3-phase 3-line, 3-phase 4-line |
|
|
Voltage |
Rating |
AC380V/100V |
|
|
Load kɛl |
Dɔŋ:1.2kaam Waktu:10kaam/10s |
||
|
Kuen Konsum |
<1VA ((Phase tök) |
||
|
dhil Anti |
> 500kΩ |
||
|
Fine Degree |
RMSKuɛl, tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ0.5Level |
||
|
Current ye |
Rating |
AC0-5A |
|
|
Load kɛl |
Dɔŋ:1.2kaam Waktu:10kaam/10s |
||
|
Kuen Konsum |
<0.4VA ((Phase tök) |
||
|
dhil Anti |
<2mΩ |
||
|
Kɛnɛya |
RMSKuɛl, tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ0.5Level |
||
|
Frekuens Rate |
45-65Hz |
||
|
Kuen Rate |
Ye tïŋ në pɛɛi, ye tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n0.5Grade, no-function accuracy1.0Level |
||
|
Elektrik Can |
Four quadrant measurement, ye luuiDɛɛrDegree1.0Grade, No WorkDɛɛrDegree1.5Level |
||
|
Harmony Wave |
Total harmonic content2-31Second, Harmonic Content2-31Ye |
||
|
Power |
Luɔi |
AC220VwalaAC/DC80-270V |
|
|
Kuen Konsum |
≤3VA |
||
|
output |
Interface dijital |
RS-485InterfaceMODBUS-RTUAgreement walaDLT645-1997/2007 |
|
|
Pulse output (Pulse output) |
2Pulse pulse output,Pulse constant:5000imp/kWh |
||
|
Wël |
Tʋʋm |
-10-55℃ |
|
|
Gɛɛr |
-20-75℃ |
||
|
Gɛlɛya |
Resistance Pressure |
> 2.5kV/1min |
|
|
绝对 Yuan |
Lɔ̈ɔ̈m, Lɔ̈ɔ̈m, Power> 500MΩ |
||
|
Power measurement range |
Active, non-active electric measurement range0-kWh, Ka tɛmɛ lamba kënë0Lɛk ka tɛmɛ |
||
◆ Dimensions
|
Panel size (L×H mm) |
Installation size ((A)×B mm) |
Dimensions of a hole ((S)×Y mm) |
Total Length (N mm) |
Dɛɛr (M mm) |
|
96×96 |
91×91 |
92×92 |
93 |
78 |
◆ Grafik kabel
1、Back panel terminal diagram
2、Wire terminal function description
|
Power |
1,2 |
AC220VwalaAC/DC80-270V |
|
Signal kɔnɔ |
4,5,6,7,8,9 |
4,6,8waA, B, CPhase Current Input (Phase Current Input) |
|
Signal Voltage |
11,12,13,14 |
3 phase voltage inputUAa,UBa,UCa,UN |
|
Relay output |
15,16,17,18,19,20,21,22 |
4Road relay output |
|
Gäm output |
30-34 |
4Road transfer output,30For public ye |
|
Pulse elektrik |
47,48,49,50 |
47,49Gɛɛl ye output passive |
|
485Interface |
58,59 |
Ka bɛɛA+a,B- |
|
Switch volume input |
70-78 |
8Road switch input,70For public ye |
