Temperature Controller Manufacturer

A Bayan:

Kä ye kek looi aye kek tɔ̈u në digital temperature and humidity sensor, ye kek tɔ̈u në digital tube, ye kek tɔ̈u në fan, heater contact, ku ye kek tɔ̈u në load disconnect alarm, sensor failure indication, RS485 communication, ku jɔl ya kä kɔ̈k peei. A lëu bï ya tɔ̈u në kë wïc bï yen ya tɔ̈u në kë wïc bï yen ya tɔ̈u në kë wïc bï yen ya tɔ̈u. Kɔc ye luui alëu bïk tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ Kä ye kek looi aye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye kek ye

2 Kä ye raan looi:

A tɛmɛ digital temperature and humidity sensor, a tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

Kɔl bɛɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ̈i bɛ̈ɛ

Në programming de key, raan ye luɔ̈ɔ̈i alëu bï parameters de control, ku parameters de luɔi de controller ya sigil;

Meter setup data * be tɔ̈ɔ̈u, ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u;

Capacity anti-electromagnetic interference ye duniŋ;

A naŋ password protection.

3 Indikator Teknis

Parameters teknis		Indikator
Range de mesure	Temperatur	-70.0℃～180.0℃
	Humidity	0%～99%
Precision	Temperatur	±0.5℃
	Humidity	±3.5%
Ajuiɛɛr Parameters	Heating	-40.0℃～40.0℃
	Fan cooling	0.℃～100.0℃
	Temperature Control	1%～99%
Kapasitet kontakti output		AC 250V/5A
Interface ë habar		RS485, MODBUS-RTU protocol
Power Supply	Voltage	AC/DC 80～270V
	Power consumption	≤5W
Resistance insulation		≥100MΩ
Pressure ye looi		Power and housing can touch metal parts/power and other terminals groups. Power and housing can touch metal parts/power and other terminals. Power and housing can touch metal parts/power and other terminals. Power and housing can touch metal parts/power and other terminals. Power and housing can touch metal parts/power and other terminals. 2kV/1min（AC,RMS）
Average hours of work without failure (Lɛɛr luɔi ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ)		≥50000 awa
Tʋʋm	Temperatur	-10℃～55℃
	Humidity	≤95%RH， No cloudy, no corrosive gas
	Lɛɛr	≤2500 m

Switch value, delay amount to control output:

Ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛ

Fungsi manual

Në tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen

Në tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen tɛ̈n yenë yen

Wël ye kek tääu thïn (Panel size 72*72mm, opening hole size 68*68mm, installation depth 85 mm)

Terminal diagram

4 Ajuiɛɛr luɔɔi ku luɔɔi

4.1 Kuen

Në tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛmɛn de tɛ

4.2 Kontrol

Factory Default Settings:

85% ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ

A tɛmɛ ye 5 ℃ bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ

A tɛmɛ ye 40°C ye fan bɛ̈n, 35°C ye fan bɛ̈n (a tɛmɛ ye 5°C ye).

To tɛmɛ wala tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

4.3 Kontrol Tests

Tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ A tɔ̈ɔ̈u ka kɔl dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ̈ɔ̈r dɔ

4.4 Sistɛm setup mode

4.4.1 Lɔ/Lɔ System Settings Mode

Lɔ sistem:

Në ye mɛn, a tɛ̈n yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen yen

Ka tɔ̈u menu dɔ̈ŋ, ka tɛ̈n ye 'CH1' nyuɔɔth, ka tɛ̈n ye 'CH2', 'COMM', 'DISP', 'ALM', 'REST' nyuɔɔth, ka tɛ̈n ye 'CH2', 'ALM', 'REST' nyuɔɔth, ka tɛ̈n ye 'CH2', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'ALM', 'AL Click Return to go to the main menu, then you can choose other main menu options to set up. Click Return to go to the main menu, then you can choose other main menu options to set up. Click Return to go to the main menu, then you can choose other main menu options to set up. "COMM" wɛ̈t ye kɔc cɔl "Local Address" (1 ~ 247) ku jɔl ya "Communication Ports Rate" (1200, 2400, 4800, 9600). 'dISP' ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ

Sistɛm yik:

"SET" ye tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈ Ka tɛ̈n ye button ye tɔ̈ɔ̈u në menu setting mode, a bɛ lɔ̈ɔ̈m në tɛ̈n ye tɔ̈ɔ̈u në minit 3.

4.4.2 Lɛɣtɛr kɛ parameters

CH1, CH2 parameters setup process is exactly the same. CH1, CH2 parameters setup process is exactly the same. CH1, CH2 parameters setup process is exactly the same. CH1, CH2 parameters setup process is exactly the same. Tɔŋ CH2 ye misal ye. Na yɔ̈ɔ̈r tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈ Nyuɔ̈th ba CH2 looi:

	Nyuɔ̈th misal	Bayan
1	CH2	Klik Return ka taa Channel 2 Parameters Settings
2		Blank

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	H.dry	Click return to enter, set the humidity value for heating to wet to start
2	2	Kanal duuɔ̈ɔ̈r looi

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	85	Left button move cursor, right button number increase and decrease, return car confirmation
2	2	Ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	HEAt	Klik Return to Enter, ka tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ
2	2	Kanal duuɔ̈ɔ̈r looi

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	5.0	Left button move cursor, right button number increase and decrease, return car confirmation
2	2	Kanal duuɔ̈ɔ̈r looi

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	Fan.C	Lɔ̈k bɛ̈n, lɔ̈k bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n bɛ̈n
2		Kanal duuɔ̈ɔ̈r looi

Klik Return Cart ye nyuɔɔth

	Nyuɔ̈th misal	Bayan
1	40.0	Left button move cursor, right button number increase and decrease, return car confirmation
2	2	Kanal duuɔ̈ɔ̈r looi

4.5 Wɛ̈t ye raan programming

Karakter	Words bayanna	Karakter	Words bayanna	Karakter	Words bayanna
PASS	Lɔ password	Fan.	Fɛɛr cooling	on	Lɛk alarm
CH1	Kanal 1 Setup	conn	Settings of Communication	of	Lɔ̈k alarm
CH2	Kanal 2 Setup	disp	Settings of Display	Add	Adres Setup
H.dry	Heating Dehumidification	ALnn	Alarm setup	bAUd	Setup Porter Rate
HEAt	Heating	rESt	Lɔ̈k tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n

4.6 User programming flow chart

5 Komunikasiɔn data

Mɛtɛr kënë ee RS485 communication interface ye cɔl asynchronous semi-dual, ye luui në MODBUS-RTU protocol, ku wɛ̈t juëc bɛ̈n lëu bï ya tɔ̈ɔ̈u në wɛ̈t ye cɔl communication line.

Function Code: A lɛ̈k tɛ̈n yenë a tɔ̈u thïn. Kä ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n

Kode	A maana	Row As
03/04	Kuen data memory	Lɔ̈k kä ye kek tɔ̈u në binary yiic de register tök wala juëc
10	Data Memory gɔ̈r	Gäm binary value tök wala juëc në register

1.Read data (Function code: 03/04): Function kënë ee kɔc ye luui bɛ̈n kony bïk ya yök në data ku jɔl ya parameters de sistem ye kek tɔ̈ɔ̈u ku gɔ̈ɔ̈r. A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n t

Data Frame Query (Host)

Duniɛ Adres	Life Command	Adres de start de registre (high bit)	Register Adrɛs tɩŋ (low bit)	Register Namba (Kuen dït)	Register Namba (Low)	CRC16 (Low)	CRC16 (Kuen dït)
01H	03H	00H	00H	00H	05H	85H	C9H

Response Data Frame (ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan)

Adres

Command

Data Dɔŋ

Temperature dɔ̈ŋ

Temperature dɔ̈ŋ

Humidity dɔŋ

Humidity dɔɔr

2nd Way High Temperature

2nd Way Temperature Low

2nd Way Humidity

2nd Way Humidity Low

Load Status High

Load Status Low

Verify Low Level

Verify High Level

01H

03H

0AH

01H

31H

03H

34H

01H

38H

2AH

00H

00H

00H

91H

31H

Cït wɛ̈t cï gɔ̈t, a lebbi wɛ̈t kän:

1. tɛmɛ = (0131H) / 10 = 305D / 10 = 30.5 ℃

Humidity =(0334H)/10=820D/10=82%

Lëk de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ de tɛmɛ

Lëk kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ̈k kɔ

A tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ

2. Na ye data dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈r ye dɔ̈ɔ̈

3. Load work state, low 8 bit data converted to 2binary number, its data format is:

Description de la condition du travail

Bit15~Bit8	Bit7	Bit6	Bit5	Bit4	Bit3	Bit2	Bit1	Bit0
Gäm	Wind 2	Kɔl 2	Gäm	Heating2	Heating1	Kɔl 1	Kɔl 1	Gäm

Na tɛ̈n ye 1 ye tɔ̈u në bit 8 ye tɔ̈u në bit 8 ye tɔ̈u në bit 8 ye tɔ̈u në bit 8 ye tɔ̈u në bit 8 ye tɔ̈u në bit 8

Misal: Load status low bit show 08H, corresponds to binary digits, then indicates the heater 1 is in working condition.

6 Intelligent Temperature Controller Communication Parameters Address Table tïŋ tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n

Smart Temperature Controller Communication Parameters Address Table

Adres	Data wɛ	Data jili	Property*	Dɛtɛ dɛtɛ	Kommentar
0	Backup	/	/	/	/
1	Adres de habar de instrument	int	R/W	2	1-247
2	Porter Rate	int	R/W	2	0：1200 1：2400 2：4800 3：9600
3	Cycle display mode	int	R/W	2	0: No loop 02: 2s 04：4s 06：6s 08：8s
4	Channel 1 Low Temperature Settings	int	R/W	2	INT*10
5	Channel 1 High Humidity Settings	int	R/W	2	INT*10
6	Channel 2 Low Temperature Settings	int	R/W	2	INT*10
7	Channel 2 High Humidity Settings	int	R/W	2	INT*10
8	Channel 1 High Temperature Settings	int	R/W	2	INT*10
9	Channel 2 High Temperature Settings	int	R/W	2	INT*10
10	Sensor 1 Temperature Value	int	R	2	INT/10
11	Sensor 1 humidity value	int	R	2	INT/10
12	Sensor 2 Temperature Value	int	R	2	INT/10
13	Sensor 2 humidity value	int	R	2	INT/10
14	Backup	/	/	/	/
15	Kalma tɛ̈n tɔ̈u	int	R	2	Note*

* Kä ye kek gam: R (kuɛn) <unk> 03 (04) W (gɔ̈t) <unk> 10

Note:

Description de la condition du travail

Bit15~Bit8	Bit7	Bit6	Bit5	Bit4	Bit3	Bit2	Bit1	Bit0
Gäm	Wind 2	Kɔl 2	Gäm	Heating2	Heating1	Kɔl 1	Kɔl 1	Gäm

Switch cabinet temperature controller Switch cabinet temperature controller

：