PlantScreen Plant Phenotype Imaging Analysis System (Plant Automatic Delivery Version) (PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen PlantScreen

PlantScreenSisitɛm ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈rA ye LED plant smart cultivation, automation control system, chlorophyll fluorescence imaging measurement analysis, plant thermal imaging analysis, plant near infrared imaging analysis, plant high spectrum analysis, automatic barcode recognition management, RGB real color 3D imaging, automatic weighing and watering system, etc. a ye tekinoloji juëc cï kek ya looi.A bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ̈n bɛ̈n ya cɔk tɛ Plant Automatic Delivery EditionPlantScreenSisitɛm kënë aye luui në biäk ye cɔl 0-40cm.

PlantScreenSisitɛm dɔw tɛ̈n tɔ̈u thïn ye tɛ̈n tɔ̈u thïn ye tɛ̈n tɔ̈u thïn:

1.Chlorophyl fluorescence imaging analysis: single image area 35x35cm, imaging measurement parameters including Fo, Fm, Fv, Fo’, Fm’, Fv’, Ft, Fv/Fm, Fv’/Fm’, Phi_PSII, NPQ, qN, qP, Rfd Ka tɛmɛ parameter fluorescence chlorophyll juëc

2.RGBImage Analysis: Image measurement parameters include:

1)Lɛɛr (Leaf Area): Useful for monitoring growth rate）

2)Solidity/Compactness. Ratio between the area covered by the plant’s convex hull and the area covered by the actual plant）

3)Lɛp Perimeter: Particularly useful for the basic leaf shape and width evaluation (combined with leaf area)）

4)Eccentricity (Eccentricity): Plant shape estimation, scalar number, eccentricity of the ellipse with same second moments as the plant (0...circle, 1...line segment)）

5)Roundness: Based on evaluating the ratio between leaf area and perimeter. Gives information about leaf roundness）

6)Medium Leaf Width Index (Wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r): Leaf area proportional to the plant skeleton (i.e. reduction of the leaf to line segment)）

7)叶片细长度SOL (Lɛɛr ye cɔl Leaves)

8)Cirkle Diameter (Cirkle Diameter). Diameter of a circle with the same area as the plant）

9)Kuen ye cɔl Convex Hull Area. Useful for compactness evaluation）

10)Centroid. Center of the plant mass position (particularly useful for the eccentricity evaluation)）

11)Internodal Distances (Dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r)

12)Yïïn dɔ̈ŋ (Growth Height)

13)Maximum Height and Width of Plant in 3 Dimensions (Dɛɛr dɔ̈ŋ ku dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ dɔ̈ŋ)

14)Lɔ̈ɔ̈m ye kɔɔr (Relative growth rate)

15)Leaf Angle (Kɔl kɔl)

16)Lɛ̈ɛ̈r ë Lɛ̈ɛ̈r ë Lɛ̈ɛ̈r ë Lɛ̈ɛ̈r ë Lɛ̈ɛ̈r (Leaf Number at Nodes)

17)Parameters kɔ̈k cït mɛn de color segmentation for plant fitness evaluation, greening index and others

3.High spectrum imaging analysis (optional), a bɛ se ka fotow tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u:

1)A ye cɔl Normalized Difference Vegetation Index (NDVI).

2)A ye cɔl Simple Ratio Index.Equation: SR = RNIR / RRED）

3)A cɔl Modified Chlorophyll Absorption in Reflectance Index (MCARI1).
Equation: MCARI1 = 1.2 * [2.5 * (R790- R670) - 1.3 * (R790- R550)]）

4)Optimized Soil-Adjusted Vegetation Index (OSAVI)
, Equation: OSAVI = (1 + 0.16) * (R790- R670) / (R790- R670 + 0.16)）

5)Greenness Index (G) yeEquation: G = R554 / R677）

6)A cɔl Modified Chlorophyll Absorption in Reflectance Index (MCARI).
Equation: MCARI = [(R700- R670) - 0.2 * (R700- R550)] * (R700/ R670)）

7)Transformed CAR Index (TCARI), Equation: TSARI = 3 * [(R700- R670) - 0.2 * (R700- R550) * (R700/ R670)]）

8)Triangular Vegetation Index (TVI), Equation: TVI = 0.5 * [120 * (R750- R550) - 200 * (R670- R550)]）

9)ZMIZarco-Tejada & Miller Index (ZMI)Equation: ZMI = R750 / R710）

10)Simple Ratio Pigment Index (SRPI) ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈rEquation: SRPI = R430 / R680）

11)Normalized Phaeophytinization Index (NPQI) ye cɔlEquation: NPQI = (R415- R435) / (R415+ R435)）

12)Fotokimikal Reflectance Index (PRI)Equation: PRI = (R531- R570) / (R531+ R570)）

13)Pigment Chlorophyll Index (NPCI) (Pigment Chlorophyll Index), NPCI = (R680- R430) / (R680+ R430)）

14)CarterIndices Carter (Indices Carter)
, Equation: Ctr1 = R695 / R420; Ctr2 = R695 / R760）

15)LichtenthalerLiichtenthaler Index, Equation: Lic1 = (R790 - R680) / (R790 + R680); Lic2 = R440 / R690）

16)SIPIStructure Intensive Pigment Index (SIPI) (Structure Intensive Pigment Index)Equation: SIPI = (R790- R450) / (R790+ R650)）

17)Gitelson-MerzlyakGitelson ku Merzlyak Index, Equation: GM1 = R750/ R550; GM2 = R750/ R700）

4.Thermal Imaging Analysis (optional): ye tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈n yenë tɛ̈

5.Near Infrared Imaging Analysis (optional): ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k ye kɛ̈k

System Configuration and Working Principle (Sistɛm kɔnɔ ku luɔɔi)

Sisitɛm dɔ bɛɛ ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot ye rot FluorCamChlorophyll fluorescence imaging, high spectrum imaging, plant thermal imaging, plant near infrared imaging, automatic irrigation fertilization and weighing system, plant identification system, etc., light adapting to indoor plants can be transferred from the conveyor belt to the imaging room for image analysis, etc. Sistɛm dɔ bɛ̈n lëu bɛ̈n looi ka tɛmɛ kɛ kɔɔr wɛɛngɛ, ka tɛmɛ kɛ kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye kɔɔr wɛɛngɛ ye.

Teknoloji:

1.Automatic loading and unloading plant samples (Loading and unloading plant samples)，Lɔ̈k kä ye kek tɔ̈ɔ̈u në barcode wala RFID tag

2.Light adaptation room: ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔi ye luɔɔiLuɔi caam 1000μmol/m².s， No thermal effect, intensity 0-100% adjustable, can be preset light cycle changes through experimental procedures, can be optional with general type or special type such as rice growth observation room etc., and can also be optional with 3D scanning imaging analysis function (including XYZ 3D scanning imaging system and software)

3.Pallet rack 35 × 30cm, ye luɔɔi bɛ̈n ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u

4.Automatic conveyor system from light adaptation room to imaging room to form a circular conveyor channel, conveyor belt uses three phase asynchronous motor of gear transmission, 200-1000W, conveyor bandwidth 320mm, load strength 130kg, speed 9m/min

5.Mobility Control System Central Processing Unit: CJ2M-CPU33. I/O dijital: 2560 point; PLC Communication: Ethernet 100Mb/s High-end PC; OMRON MECHATROLINK-II Max 16 Axis Precision Positioning

6.Plant imaging measurement room: 150cm (length) × 150cm (width) × 220cm (height), with ambient light-isolated, quick automatic opening and closing door, opening and closing cycle less than 3 seconds, conveyor belt entry gate light screen sensing system, bar code identifier and RFID reader

7.Kɔc ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n

8.RFIDKɔɔr ŋic: 2-20cm; Kuen: RS485; Barcode identifier lëu bï 1D, 2D ku QR code kuɛn, LED light source lëu bï ya ŋic në kë ye cɔl weak light, RS485 communication

9.F3EM2 ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam, ye kɔc cï gam

10. Chlorophyll fluorescence imaging: ka kɔc cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt cï röt、 PLC control automatic up and down moving focus system, large 73 × 73cm LED light source board, 7 bit filter wheel etc., single image area 35 × 35cm, measure light orange 620nm, orange and white double wavelength photochemical light, saturated light flash for white, maximum light strength 3600 μmol.m-2.s-1, lens resolution 1360 × 1024 pixels

11.Automatic irrigation and weighing,A lëu bɛ̈n ya tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u ka tɔ̈ɔ̈u Automatic zero calibration before weighing, and can also be automatically calibrated again with known weight (such as weighing) items. Automatic zero calibration before weighing, and can also be automatically calibrated again with known weight (such as weighing) items. Automatic zero calibration before weighing, and can also be automatically calibrated again with known weight (such as weighing) items. Automatic zero calibration before weighing, and can also be automatically calibrated again with known weight (such as weighing) items. Kuen gël: IP66

12. Customer customized weighing system consists of 4 weighing units, safety carrying limit: 150% Ln; temperature compensation: -10-40°C, standard measuring range 7kg, can be chosen 10kg, 15kg or 20kg; standard weighing system is used to accurately weigh the standard plant cultivation pot, maximum bearing weight 300g, resolution 1g, precision 0.5g, measurement parameters including actual weight, watering quantity etc.

13. RGBImage: Top and side 3D imaging (3 cameras), each camera has a separate control face to set the exposure time, gain, white balance etc., through the control face snapshot key can instantly take photos and show the resolution and other information, also can automatically image and store to the database through automatic mode, each scan image time is less than 10 seconds, optional 3D modeling function

14.RGBSisitɛm ye fotow tɔ̈ɔ̈u thïn ee kamar ye fotow tɔ̈ɔ̈u thïn (ye fotow tɔ̈ɔ̈u thïn), conveyor belt ku position sensor, 3 cameras, light source ku software ye fotow tɔ̈ɔ̈u thïn, ye fotow tɔ̈ɔ̈u thïn 35× 35cm, focal distance range 22-27cm, LED cold white light source (no thermal effect on plants)

15.USB Ethernet Camera, pixel 2592 ye gam× 1944, bit resolution 12bit, light quantum efficiency: blue light peak 465nm, green light peak 540nm, red light peak 610nm; 28mm optical lens, caliber 43.2mm, aperture range 2.8-F16

16. NIRNear Infrared Imaging Unit: Image can capture 1450-1600nm water absorption band to reflect plant moisture condition, showing high NIR absorption value when water supply is abundant, and high NIR reflection when drought pressures, NIR false color imaging can reflect and analyze plant moisture condition through software.

17.High spectrum imaging unit includes optical isolation imaging measuring room, automatic opening and closing doors, conveyor belt, PLC control automatic moving focus lens including SWIR and VNIR lenses, light source, imaging analysis system etc., VNIR lens band 380nm-1000nm, aperture F/0.2, gap width 25μm, gap length 18mm, frame speed 12-236 fps. SWIR lens band 900-2500nm, aperture F/0.2, gap width 25μm, gap length 18mm, frame speed 60 or 100 fps, imaging area 35 × 35cm

18.Kɔc ye luui alëu bïk SWIR imaging, VNIR imaging wala lens fila full band imaging kuanycök në luɔɔi de kɛ̈ɛ̈r ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc

19.Thermal imaging unit: resolution 640 × 480 pixels, temperature range -20-120°C, sensitivity NETD<0.05°C@30°C/50mK, precision ± 2°C, standard imaging area can reach 35 × 35cm, focal distance range 40-50cm, white light source, maximum light intensity 500 μmol.m-2.s-1, 0-100% adjustable

20.FS-WIBig Plant Growth Room

ØLight source: cold white LED (6500K) + far red LED (735nm), other light sources such as RGB three color light source board can be customized, can be 0-100% regulated, dedicated light source cooling air flow channel, can be programmed to simulate day and night cycle changes, sunrise and sunset etc. natural light environment changes and other kinds of arbitrary changes

ØMaximum homogeneous light intensity: 1000μmol ((photons) / m².s, can customize higher light intensity

ØTemperature range: 10 ℃-40 ℃ (control effect related to light strength and ambient temperature, room temperature is up to 30 ℃), can customize larger temperature range, can be programmed to simulate day and night cycle changes, sunrise and sunset etc. temperature changes in nature and other kinds of arbitrary changes

Ø40-80% ± 7% (ye kë ye cɔl 'control effect' ye kë ye cɔl 'light intensity'), a lëu bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi bï ya looi

21.System Control and Data Acquisition Analysis System (Sistɛm de kɔɔr ku tɛ̈n yenë kɔɔr ku tɛ̈n yenë kɔɔr ku tɛ̈n yenë kɔɔr)

ØGraphical Interface ye raan luɔi ye

ØUser defined, editable automated measurement protocols (protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols) (Protocols)

ØMySQLDatabase management system, lëu bï ya luui në database dït ye kɔc miliyɔn juëc tɔ̈u, ku bï ya kony në tɛ̈n yenë kɔc tɔ̈u thïn, ku bï ya tɛ̈n yenë kɔc tɔ̈u thïn ya tɔ̈u thïn

ØPlant code registration function: including plant identification code, the tray identification code and so on stored in the database, when measuring automatically extracting automatic reading barcode or RFID tags. Plant code registration function: including plant identification code, the tray identification code and so on stored in the database, when measuring automatically extracting automatic reading barcode or RFID tags.

ØTouch screen operation interface, online show plant tray number, light intensity, analyze measurement status and results etc., easy to control all mechanical parts and imaging workstations through software. A ye tɛmɛ kɛnɛya ye tɛmɛ kɛnɛya ye tɛmɛ kɛnɛya ye tɛmɛ kɛnɛya ye tɛmɛ kɛnɛya

ØA lëu ba tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ

ØProtocols (Protocols) tɩŋa start key, end key, pause key

ØA lëu bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi bï rot looi

ØRGB Digital Growth Analysis for 3 Camera Views, Including Threshold Analysis and Color Analysis (RGB Digital Growth Analysis for 3 Camera Views, Including Threshold Analysis and Color Analysis) (RGB Digital Growth Analysis for 3 Camera Views, Including Threshold Analysis and Color Analysis)

ØHa fotow ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence ye kɔnɔ fluorescence. Kä ye kek tïŋ aye kek tɔ̈ɔ̈u në database yic në form de original images ku analytical data.

ØNë FIR thermal imaging, 16-bit images alëu bï ya looi në MATLAB wala bï ya looi në software yic.

Wuro:Eropa