Član VIP
Qingdao Sulfuric Acid Flow Meter
Description: SP-LDE series sulfuric acid flow meter, diluted hydrochloric acid digital meter, a whole Chinese electromagnetic converter core uses high
Detalji proizvoda
Description:
SP-LDE Series Sulfuric Acid Flow MeterA ye electromagnetic converter kernel ye tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në tɛ̈n yenë yen tɔ̈ɔ̈u në A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n A lëu bï kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc ye kɔc. Sensor de yen ye luɔɔi de magnetic field technology ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈k ye cɛ̈ɛ̈
Ajuiɛɛr
SP-LDE seriSulfuric Acid Flow MeterA tɔŋ Faraday electromagnetic induction law. Flow meter's measurement tube ye short tube ye cïn magnetic alloy ye cɔl non-conductive alloy ye cɔl insulation material. Electrodes fila ye tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ tɛmɛ. A electrode head and the lining inside surface are essentially the same. A electrode head and the lining inside surface are essentially the same. A electrode head and the lining inside surface are essentially the same. Na cï magnetic coil ye magnetic pulse ye looi, a bï magnetic field ye looi ke ye magnetic flux density B ye looi në direction vertical to the measuring tube axis. Në ye thaa kënë, na cï lëu ye tɔ̈u në tubu de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ɛ̈r de tɛ̈ A ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈ E (signal de flux) ye tɔ̈u në electrode yic ku ye tɔ̈u në cable yic. Ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ, ka tɛmɛ
Yeŋö bɛ yɛl ka gël
Në kë de lööŋ ke kɔc cï gam GB4208-84 ku lööŋ ke kɔc cï gam IEC529-76, lööŋ ke kɔc cï gam aye:
IP65: Pii ye cɔl anti-spray type, ye pii ye cɔl tap ye pii ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor ye cɔl sensor
IP68: ye tɛ̈n ye tɔ̈u piny, ye tɛ̈n ye tɔ̈u piny.
A ka tɛmɛ IP68, a ka tɛmɛ IP65, a ka tɛmɛ IP65.
How to select additional functions (Wɛ̈n bɛ̈n yɔ̈ɔ̈r)
Basic type has a display, output 4-20mA and 0-1kHz alarm and other functions, you can add additional functions according to the actual situation. Basic type has a display, output 4-20mA and 0-1kHz alarm and other functions. Basic type has a display, output 4-20mA and 0-1kHz alarm and other functions. Basic type has a display, output 4-
Split Installation: Sensor wɛ̈t ka tɔ̈ɔ̈u piny dɛɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈r dɛ̈ɛ̈
RS-485 Communication: N'a sɔrɔ ka tɛmɛ RS-485 communication function, a sɔrɔ ka tɛmɛ sensors ku jɔl ya kuje wɛrɛw.
Sulfuric Acid Flow MeterParameters baara:
|
DN ye cɔl |
10,15,20.25,32,40,50,65,80,100,125,150,200,250,300,350,400,500,600……. .1800 |
|
Nominal pressure Mpa |
0.6,1.0，1.6，2.5，4.0MPa |
|
Kɔmpiye Process |
Flange Connection, Flange Standard: GB/T9119-2000 |
|
Struktur form |
A yeke (IP65), a yeke (IP65) la a yeke (IP68) |
|
Lining Material |
PTFE (≥DN25), neoprene (≥DN65), F46， Polyurethane, |
|
Elektrod Material |
Platinum, tungsten, titanium, 316L, tungsten carbide |
|
Material de tube de mesure |
304 Stainless Steel |
|
Kä ye kek looi ku kä ye kek looi |
Carbon steel (standard), stainless steel (non-standard) |
|
Temperature ye kɔnɔ |
≤180℃ |
|
Alam anti-explosion |
No explosion |
|
Level of accuracy |
0.5 (0.3m/s ~ 10m/s) |
|
Repetibility |
0.15% |
|
A lëu bï ya tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ |
0.05m/s～12m/s |
|
Kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl-kɔl |
0.3m/s ~ 10m/s (0.5 ye yic) |
|
Power |
18 ~ 36VDC wala 85 ~ 265VAC, Power: ka tɔ̈u 8W |
|
output |
4-20mA， Frequency output (0 ~ 10KHZ), pulse equivalent |
|
Magnetic Method |
Three values low frequency rectangular wave exciter and high frequency exciter |
|
Magnetic Current ye |
160mA |
|
Minimum conductivity ye wïc |
≥0.5μs/cm2 |
|
Elektrik Interface |
M18×1.5 |
|
Ngam gël |
IP65 (ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan |
|
Lokal |
Grounding ring (user specified) wala ground electrode, pipe grounding |
|
Nyuɔ̈th |
Resolution ye nyuɔɔth FSTN mode 128×64 |
|
Waktu data tɔ̈ɔ̈u |
EEPROM ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n |
|
Average Time Without Failure |
MTBF=30000h |
Sulfuric Acid Flow MeterLɔ̈ɔ̈i de Lining:
|
Lining Material |
Main baara |
Luɔi |
|
Neoprene Neoprene |
A ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r ye, a ye kɛ̈ɛ̈r |
<80°C, koom, koom, koom |
|
Rubber polyurethane Polyurethane |
A tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ |
<60°C, cɛ̈ɛ̈r, cɛ̈ɛ̈r, cɛ̈ɛ̈r, cɛ̈ɛ̈r, cɛ̈ɛ̈r. |
|
Polytetrafluoroethylene PTFE |
Chemical properties are the most stable material, capable of boiling hydrochloric acid, sulfuric acid, nitric acid and royal water, concentrated alkali and various organic solvents. Chemical properties are the most stable material, capable of boiling hydrochloric acid, sulfuric acid, nitric acid and royal water, concentrated alkali and various organic solvents. |
<180°C, acid, alkali, etc. ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye kɛnɛya ye |
|
F46 |
Chemical stability, electrical insulation, lubricability, non-stickiness and non-flammability is similar to PTFE, but F46 material strength, resistance to aging, temperature resistance and low temperature flexibility is better than PTFE. Kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ ye kɔnɔŋ |
<180°C, hydrochloric acid, sulfuric acid, royal water and strong oxidant etc., hygienic media |
Sulfuric Acid Flow MeterKarewa
| Model | Kalibre | |||||
| SP-LDE | 15~2600 | |||||
| Kode | Elektrod Material | |||||
| K1 | 316L | |||||
| K2 | HB | |||||
| K3 | HC | |||||
| K4 | Titanium | |||||
| K5 | Tantal | |||||
| K6 | Platinum alloy | |||||
| K7 | Stainless steel coated tungsten carbide | |||||
| Kode | Material ye kɔnɔ | |||||
| C1 | Tetrafluoroethylene (F4) | |||||
| C2 | Polyfluoroetylene (F46) | |||||
| C3 | Polyfluoroethylene (FS) | |||||
| C4 | Polyvinyl rubber | |||||
| C5 | Rubber polyammonium | |||||
| Kode | Funksiɔn | |||||
| E1 | 0.3 ye | |||||
| E2 | 0.5 ye | |||||
| E3 | Level 1 | |||||
| F1 | 4－20Madc, Load ≤750Ω | |||||
| F2 | 0-3khz, 5v active, variable pulse width, output high-end effective frequency | |||||
| F3 | RS485 Interface | |||||
| T1 | Normal Temperature | |||||
| T2 | High Temperature | |||||
| T3 | Super High Temperature | |||||
| P1 | 1．0MPa | |||||
| P2 | 1．6MPa | |||||
| P3 | 4．0MPa | |||||
| P4 | 16MPa | |||||
| D1 | 220VAC±10％ | |||||
| D2 | 24VDC±10％ | |||||
| J1 | Struktur tök | |||||
| J2 | Struktur split-type | |||||
| J3 | Struktur ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l ye kɛ̈l | |||||
Онлайн разпит
-
Kontakti
-
Kompanija
-
Telefon
-
E-mail
-
WeChat
-
Kod provjere
-
Сједност поруки
-