Član VIP
S-SCLDO dissolved oxygen transmitter
● Oxygen dissolved measurement range 0~20mg/L (0~200% saturation). ●RS485 Communication Interface: MODBUS RTU Communication Protocol bï kɔmpiöta ya
Detalji proizvoda
1. Kuen
Kɔɔr kënë ye masin ye oksijɛn ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈u ye tɔ̈ɔ̈ A tɔ̈ɔ̈u thëm transmitter, a tɔ̈ɔ̈u thëm compensation function. Calibration function ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r ye kɛ̈ɛ̈r A lëu bï ya luɔ̈ɔ̈i në ɣän kɔ̈k peei, aquaculture, ku jɔl ya ɣän kɔ̈k peei.1.1 Funksiɔn
- Oxygen dissolved measurement range 0~20mg/L (0~200% saturation).
- RS485 Communication Interface: MODBUS RTU Communication Protocol ee kony bï kɔmpiöta ya tɔ̈ɔ̈u ku bï kɔmpiöta ya tɔ̈ɔ̈u.
- ModBus wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r wɛ̈ɛ̈r.
- A tɛ̈n yenë kɛ̈ɛ̈r ye kɔnɔ, a tɛ̈n yenë kɛ̈ɛ̈r ye kɔnɔ, a tɛ̈n yenë kɛ̈ɛ̈r ye kɔnɔ 10 ~ 30V ye kɔnɔ.
- Luɔɔi fluorescence, oxygen wala electrolyte wala.
1.2 Parameters tɛkinoloji
| Power supply | DC 10~30V |
| Power consumption | 0.2W |
| Interface ë komunikasyon | RS485; Modbus-RTU protocol ye gam; Lɔ̈k ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t |
| Prinsip measure | Metode fluorescence |
| Range de mesure | 0~20mg/L (0~200% tɛ̈ɛ̈r) |
| Kɛnɛnga | ±3%FS; ±0.5℃(25℃) |
| Resolution | 0.01mg/L; 0.1%; 0.1℃ |
| Waktu jaabi | ≤60sec |
| Ajuiɛɛr luɔi | 0~40℃ |
| Lifetime fluorescent film | Kuen 1 ye luui |
| Kä ye tɔ̈ɔ̈u | -10~60℃ |
| Waterproof grade | IP68 |
| Electrode line ye | Default 5m |
| Materiɛl Housing | Plastik ye cɔl corrosion resistant, stainless steel |
1.3 Pilih karen
| S- | Kode Kompanyi | |||
| LDO- | Fluorescence soluble oxygen transmitter (Fluorescence soluble oxygen transmitter) | |||
| N01- | RS485 (Modbus-RTU protocol) | |||
| 1 | Generation Housing |
1.4 Listi karen
◆Fluorescence soluble oxygen transmitter 1 set◆Kabel 5m
◆ Certificate, warranty card, etc.
2.3 Kalibrasiɔn
2.3.1 Luɔi de kalibrasiɔn
Zero oxygen standard preparation: prepare 1 cup, take 200mL of distilled water into the cup, then add water-free sodium sulfate, while adding a side stir, wait until water-free sodium sulfate saturates, when the standard solution is counted as near 0 oxygen.100% oxygen environment preparation: prepare 1 cup, take 200mL of pure water (or distilled water) into the cup, add air pump, and fully expose the solution to the air (at least 30 minutes). 100% oxygen environment preparation: prepare 1 cup of boiling, take 200mL of pure water (or distilled water) into the cup, add air pump, and fully expose the solution to the air (at least 30 minutes). Lëk: N'a tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen tɛ̈n yen
2.3.2 Kalibrasiɔn
Yïn ye tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛKa sensor dɔ̈ɔ̈r 100% oxygen, ka tɛ̈n yenë oxygen tɔ̈u thïn, ka tɛ̈n yenë oxygen tɔ̈u thïn, ka tɛ̈n yenë oxygen tɔ̈u thïn, ka tɛ̈n yenë oxygen tɔ̈u thïn.
O kɔ̈k, ka sensor tɔ̈ɔ̈u në oxygen zero, ka kɛ̈ɛ̈r nɔgɔ̈ŋ, ka kɛ̈ɛ̈r nɔgɔ̈ŋ, ka kɛ̈ɛ̈r nɔgɔ̈ŋ, ka kɛ̈ɛ̈r nɔgɔ̈ŋ.
2.3 ModBus Communication and Register Detail
2.3.1 Parameters ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye
| Koding | 8 bit binary |
| Data bit | 8 bit |
| Parity Verification | Wala |
| Stop bit | 1 bit |
| Verification of Error | CRC (Redundant Cycle Code) |
| Porter Rate | 2400bit/s, 4800bit/s, 9600 bit/s, factory default 4800bit/s |
2.3.2 Data frame format definition
Modbus-RTU wɛ̈ɛ̈r ë wɛ̈ɛ̈r ë wɛ̈ɛ̈r ë wɛ̈ɛ̈r ë wɛ̈ɛ̈r:Ajuiɛɛr fɔlɔ ≥4 bytes
Adres = 1 bayt
Funksiɔn koodu = 1 bayt
Data zone = N bayt
Verification of error = 16 bit CRC code
Wakt tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n
Address code: Address of the transmitter, is unique in the communication network (factory default 0x01). Address code: Address of the transmitter, is unique in the communication network (factory default 0x01). Address code: Address of the transmitter, is unique in the communication network (factory default 0x01).
Function code: ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye kɔɔr ye.
Data Zone: Data Zone ye data ye kɔrɔ, tïŋ 16bits data ye kɔrɔ! CRC code: Bayt 2 ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye kɛ̈n ye.
2.3.3 Adres ye gɔ̈t
| Adres register | Operasiɔn | Bayan |
| 0000H, 0001H | 03 | Oxygen saturation (%; floating point) |
| 0002H, 0003H | 03 | Oxygen ye looi (mg/L; floating point) |
| 0004H, 0005H | 03 | Temperature (℃; floating point) |
| 1010H | 06 | Kalibration (gɔ̈ɔ̈r 0x0001 kalibration zero point, Gäm 0x0002 kalibre 100% saturation point) |
| 1020H | 03/06 | Salt (‰; default 0) |
| 1022H | 03/06 | Tɔŋ ye cɔl atmosphère (kPa; default 101.33, real value increased 100 times) |
2.3.4 Sample protocols and explanations (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols and explanations) (Sample protocols)
Cïmën 1: Kuen tɛ̈n yenë oxygen tɔ̈u thïn (%), tɛ̈n yenë oxygen tɔ̈u thïn (mg/L), ku tɛ̈n yenë tɔ̈u thïnFrame tɔ̈u:
| Adres Kode | Kode Funksiɔn | Adres register | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x03 | 0x00 0x00 | 0x00 0x06 | 0xc5 | 0xc8 |
| Adres Kode | Kode Funksiɔn | Bayt hakkii | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x03 | 0x0c | 0x3f 0x6a 0xeb 0x52 0x40 0xe2 0x48 0xb0 0x41 0xe5 0x85 0xc5 | 0xa7 | 0x49 |
40 e2 48 b0 ye 7.071373 Oxygen ye 7.07mg/L ye
41 e5 85 c5 ye 28.690317 ye tɛmɛ 28.7°C
Misal 2: Lɛ̈k tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n tɛ̈n
Fɛɛr ye gɔ̈ɔ̈r: gɔ̈ɔ̈r tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n ye tɛ̈n
Write to 0x1022 register 10135 convert to hexadecimal to 2797
| Adres Kode | Kode Funksiɔn | Adres register | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x06 | 0x10 0x22 | 0x27 0x97 | 0x77 | 0x5e |
| Adres Kode | Kode Funksiɔn | Adres register | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x06 | 0x10 0x22 | 0x27 0x97 | 0x77 | 0x5e |
Ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka tɛmɛ ka t
| Adres Kode | Kode Funksiɔn | Adres register | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x06 | 0x10 0x10 | 0x00 0x01 | 0x4d | 0x0f |
| Adres Kode | Kode Funksiɔn | Adres register | Lööŋ Register | Verification code low | Verification code ye dït |
| 0x01 | 0x06 | 0x10 0x10 | 0x00 0x01 | 0x4d | 0x0f |
3. Lɔ̈k kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l kɛ̈ɛ̈l
◆ N'a tɛ̈n ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan ye raan◆ Fluorescent film front end of device should avoid collision or scratch, any damage will cause measurement accuracy to decline or even unable to be used.◆ Fluorescent film front end of device should avoid collision or scratch, any damage will cause measurement accuracy to decline or even unable to be used.◆ Fluorescent
◆ Lɔ̈k tɔ̈u në organic solvents, lɔ̈k tɔ̈u në organic solvents bï fluorescent caps looi.
◆ Ka tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈r tɛ̈ɛ̈
◆ Kuɛl-kuɛl:
For the outer surface of the equipment; ye kë ye kek looi A lëu bï yɔ̈ɔ̈r kɛ pi ye, a lëu bï yɔ̈ɔ̈r kɛ pɛ̈l ye, a lëu bï yɔ̈ɔ̈r kɛ pɛ̈l ye, a lëu bï yɔ̈ɔ̈r kɛ pɛ̈l ye.
For fluorescent hat outdoor surface; Lɔ̈ɔ̈m nɛy ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ ye kɔnɔ; Na yïn wïc ba tɛ̈ɛ̈r, tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka tɛ̈ɛ̈r ka t
N'a tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka tɛ̈ɛ̈u ka
| Power supply | DC 10~30V |
| Power consumption | 0.2W |
| Interface ë komunikasyon | RS485; Modbus-RTU protocol ye gam; Lɔ̈k ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t ë wɛ̈t |
| Prinsip measure | Metode fluorescence |
| Range de mesure | 0~20mg/L (0~200% tɛ̈ɛ̈r) |
| Kɛnɛnga | ±3%FS; ±0.5℃(25℃) |
| Resolution | 0.01mg/L; 0.1%; 0.1℃ |
| Waktu jaabi | ≤60sec |
| Ajuiɛɛr luɔi | 0~40℃ |
| Lifetime fluorescent film | Kuen 1 ye luui |
| Kä ye tɔ̈ɔ̈u | -10~60℃ |
| Waterproof grade | IP68 |
| Electrode line ye | Default 5m |
| Materiɛl Housing | Plastik ye cɔl corrosion resistant, stainless steel |
Онлайн разпит
