Granite water film dust remover mainly consists of Venturi tube, supervisor, overflow tank, auxiliary cylinder and so on, its working principle is: dusty gas flow through smoke pipe into Venturi tube, at the throat entrance to spray water evenly into the smoke gas, the smoke gas tells water dissolve into small drops of water. Në ye luɔɔi kënë yic, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey, a ye cɔl grey. The cylinder is a round cylinder, water from the dust remover not the overflow tank into the main cylinder, so that the whole cylinder inner wall journey a layer of water film flowing from above to below, gas from the bottom of the cylinder cut into, in the cylinder rotating up, the dusty gas in the centrifugal effect always has friction with the cylinder wall to the water film, so the dusty gas is moisturized by the water film, the dusty particles are flowing with water to the dust remover point, from the drainage hole, in the bottom of the cylinder there is a sealing tank to prevent smoke gas from the bottom, the dust removal after the waste water flows from the bottom to the sediment ground, precipitation and to recycle use. Gas cï bɛ̈n cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk cɔk c